BATTERY SYSTEM

названиеартикулкол.описаниекомментарий
*ASY,TESTED BMS,96S,MDLS1021970-00-B1ASY,TESTED BMS,96S,MDLSBMS S3, 4 HVIL Nodes

*COVER,BLANKET,CERAMIC,HV BATTERY,MDLS - Service Only1025301-00-A1CERAMIC BATTERY BLANKET PLASTIC COVER - SERVICE ONLYbattery blanket plastic cover with buytl. for use when only the plastic cover needs to be replaced and not the entire battery blanket.

*SEAL,HV BATTERY,SPLASH CASTING WIPER1012560-00-A2HIGH VOLTAGE BATTERY SPLASH CASTING WIPER SEALSeal on the curved edge of the battery next to front stack.

*POP RIVET, D4 DOMED HEAD 4.8 GRIP AL1003668-00-C12DOMED HEAD POP RIVET 4.8MM ALUMINUMUse to secure Retainer Sill to Rail.

19ASY,SIGNAL PLUG,LV RAPID MATE,MDLS1003915-00-D1LOW VOLTAGE RAPID MATE SIGNAL PLUG ASSEMBLY

*SCR,M5-0.8X16,R WSH,MPT,STL 8.8,ZN,PATCH1004379-00-A23SCREW, M5-0.8X16MM, ROUND WASHER HEAD, MATPOINT, STEEL ZINC WITH PATCHUse on Rapidmate to support plate.

25SCR,M10-1.50X25,HF,MPNT,STL10.9,ZNC,PTCH 1004383-00-C16SCREW, M10-1.50X25MM, MATPOINT, STEEL ZINC WITH PATCHFor battery rail to vehicle, 8 per side.

*SCR,M8-1.25X19,HEX,BRSS,PATCH,W/WSHRS1004392-00-B2SCR,M8-1.25X19,HEX,BRSS,PATCH,W/WSHRS

*SCR,M4-0.7X6,PH,STL 9.8,ZN,PTCH,EXT L/W1004402-00-B8SCR,M4-0.7X6,PH,STL 9.8,ZN,PTCH,EXT L/Wuse for BMS mounting

*SUPPORT,INSULATING,PCB SHUNT,TOP1005552-00-A1TOP INSULATING PCB SHUNT SUPPORT

4SCR,M4-0.7x14.5,TAMPR,TRX,STL,ZnNi,PATCH 1006009-00-B13SCREW, M4-0.7x14.5, TAMPERPROOF, TORX, STEEL, ZINC NICKEL WITH PATCHOk to use B or newer. Fuse panel and coolant rapidmate

9BLANKET,CERAMIC,HV BATTERY,MDLS1006466-00-F1HIGH VOLTAGE BATTERY - CERAMIC BLANKETcompatible with all 1.0 and 1.5 enclosure battery packs. OK to use 1006466-00-E or newer